CMTS Show Guide Product Preview

3M Canada Inc

Booth #1812

New 3M™ Cubitron™ II Coated Abrasives for Metal Grinding.

Unlike conventional abrasives, fabricated of irregular shaped, randomly-placed minerals, Cubitron II abrasives employ 3M’s new proprietary “shaped grain” technology to form precisely shaped triangles of ceramic aluminum oxide. Engineered to be self-sharpening, the consistent shape and size of the grain within Cubitron II products help achieve dramatically faster cuts.

AIM inc

Booth #3026

AFM 3D8-S

AIM introduces the most versatile wire bender in the market. The Synchro versatility is attributed to 3 independent rotary heads and a servo turret head. Coupled together they are  able to make several complex profiles with one tool setup. See AIM Sales for details.

AirCell Outdoor Compressor Rooms

Booth #3130

AirCell Outdoor Air Compressor Rooms

The AirCell Modular Exterior Compressor Room is a self contained, weatherproof, ventilated unit, that functions in all environments and operates independent and outside of your plant. It is able to house a wide variety of compressors, dryers, and down stream equipment. Saves on floor space and increases compressor reliability.

Akro-Mils

Booth #1212

Ultra-Clear InSight™ Bins

Akro-Mils introduces InSight Bins — transparent polycarbonate bins that will make a visible difference in your storage and organization. Available in 4 sizes, the bins can stack, sit on shelving, or hang on rails and louvered panels. Clear length and width dividers are available. Optional lids protect contents from dust.

Akro-Mils

Booth #1212

Indicator™ Two-Toned Bins

Akro-Mils Indicator Bins simplify visual recognition when supplies need to be replenished. Never run out of inventory — stock, pick, flip and replenish! Orange reserve prevents stock-outs. Available in 2 sizes, these bins offer an innovative, low-cost alternative to high-end inventory control systems.

Akro-Mils

Booth #1212

19-Series Steel Storage Cabinets

The heavy-duty 19-Series Steel Storage Cabinets line features high-impact polystyrene drawers in five colors — Black, Blue, Gray, Red and Yellow. These industry-leading steel cabinets are ideal for storing, consolidating and organizing small parts. The 19109 cabinet features a locking door for added security. Perfect for 5S Lean initiatives!

Ameritherm - An Ambrell Company

Booth #1733

EKOHEAT

The EKOHEAT line of induction heating solutions has been expanded significantly. Higher power, lower frequency solutions have been added to allow clients to heat parts of almost any size and density. Whether your application requires a 1kHz/800kW unit or a 100kHz/10kW unit, the EKOHEAT line is the answer.

Ameritherm - An Ambrell Company

Booth #1733

eVIEW

eVIEW is a PC-based application for real-time visualization, analysis and storage of process data from EASYHEAT and EKOHEAT induction heating systems. With eVIEW from Ambrell, clients can collect, store, and analyze induction heating data.

Applied Precision Inc

Booth #3506

Steinbichler COMET L3D featuring LED Technology

Affordable high performance 3D scanner: compact, portable, excellent accuracy & easy to operate with fast & efficient 3D data acquisition. This system is a cost effective entry level technology solution for users who want the benefits of optical scanning metrology without compromising performance or data quality. www.cometL3D.com

Applied Precision Inc

Booth #3506

Long Range Scanning Services - Plant Scanning for ‘as built’ 3D information

Long Range 3D scanning offers the capability to capture ‘as built’ information for piping layouts, plant layouts, historical buildings, heritage sites and even full size aircraft digitizing. Complete, accurate and current 3D information for your facilities. www.longrangescanner.com

Applied Precision Inc

Booth #3506

AICON TubeInspect – quick & accurate quality assurance for tube manufacturing

A non-contact 3D optical measuring system for measuring bent & freeform tubes. This fully programmable system with sixteen high resolution digital cameras accurately measures tube geometries in seconds, providing independent results without mechanical fixtures or clamping devices. www.tubeinspect.com

Atlas Copco Compressors

Booth #1126

Nitrogen Generator

Want to reduce your cost of nitrogen significantly? Our PSA Nitrogen Generators produce nitrogen on site easily & efficiently. Reduce your dependence on outside delivery of nitrogen. NG 7-81: 45 to 4600 cfh with purity up to 99.999%. For more information visit atlascopco.com or call at 1 800 665 4721

Autodesk Canada

Booth #126

AUTODESK® INVENTOR® 2012

Autodesk® Inventor® software helps manufacturers connect every phase of their designing process through a single digital model that can simulate performance. Before building a physical prototype, learn how creating a Digital Prototype will improve the ability to win business by lowering development costs, reducing waste and compressing time to market.

Autodesk Canada

Booth #126

NEW Autodesk® Suite 2012 Software

New design and creation suites provide comprehensive workflows for specific needs—in building design, product design, factory design, plant design, and more. These compatible sets of tools offer interoperability and capabilities leveraging the familiarity of Autodesk’s leading design and visualization solutions, in a single economical and convenient package. Visit www.autodesk.com/suites.

Autodesk Canada

Booth #126

Autodesk® Product Design Suite 2012

Autodesk® Product Design Suite 2012 software is a comprehensive set of design, visualization, and simulation software. From early concepts to detailed engineering and simulation the Autodesk Product Design Suite is an ideal Digital Prototyping solution for your entire product design workflow. Available in “Standard”, “Premium”, and “Ultimate” versions. www.autodesk.com/suites.

AX-iom ERP Inc.

Booth #2612

Microsoft Dynamics AX 2012

With over 1000 new features and industry capabilities, Microsoft Dynamics AX 2012 is a single, powerful enterprise resource planning (ERP) solution that is simple to learn and use so you can deliver value faster, take advantage of business opportunities, and drive user involvement and innovation across the organization.

Axis Prototypes

Booth #1139

Digital Materials

Axis will be showcasing parts made with the recently acquired Connex 500 machine. Our clients can now order parts with durometers ranging from 30A to 90D on the same part! Come see what all the buzz is about at booth 1139.

Benz Inc

Booth #1810

BENZ Solidfix® modular quick-change tooling system

BENZ has redefined the modular Quick-Change-System. The centered mechanism and resulting rigidity, repeatability and torque are unrivaled in the industry. Easy one-hand operation with no screws or special tools needed, self-locking clamping mechanism that cannot be over-tightened and an exclusive self-securing device that will prevent your tool from falling out.

Benz Inc

Booth #1810

BENZ Capto modular quick change system

BENZ has improved the Capto clamping mechanism to be more operator friendly by adding a clamping device that lets the operator visually see when the tool is locked. With just a quarter turn the starting torque is so high that the clamping force is increased above the required ISO Norm.

Bucan Electric Heating Devices Inc.

Booth #3714

Hazardous Location Immersion Heaters

Bucan Electric Heating Devices is pleased to announce the addition of Hazardous Location, also called Explosion Proof, terminal boxes to our complete line of heaters for liquids and gases. This major addition continues our promise to you to be “The Heating Innovation Specialist”.

Canadian Industrial Machinery

Booth #5148

Cimindustry.com’s goal is to be the information tool of choice for Canada’s machine tool and fabricating industries. Cimindustry.com also features the The CIM Supplier Directory is open to companies and exclusive distributors of process applications, products, and opportunities in the machine tool and fabricating industries.

Canadian Welding Association

Booth #5038

CWB Institute

CWB Group Now Offers More Learning Options! The CWB Institute is your one-stop-shop for welding education. From in-class courses to self paced online courses, we are proud to extend a new form of learning with greater flexibility. Go to www.cwbinstitute.org now to check out our courses and register today!

Canadian Welding Association

Booth #5038

New CWA Membership Benefits

The CWA is now publishing two bi-monthly electronic membership newsletters. CWA Engage focuses on what’s happening in industry, technology and innovation while CWA Channel focuses on providing our membership with the latest news and events at the National and Chapter levels. For more information go to www.cwa-acs.org today!

Canadian Welding Association

Booth #5038

CWB Value Optimizer and Safety Assessment

The CWB Value Optimizer is an audit that can deliver cost savings through gains in productivity and can help generate cost reductions. The CWB Safety Assessment is beneficial to improve safety in your shop and reduce costs at the same time. Go to www.cwbgroup.org for more information!

Centris Technologies

Booth #1216

Advanced Process Controller

The APC - Advanced Process Controller - is an IEC 61131-3 industrial computing chassis, for automation and control and data acquisition applications. It replaces traditionnal PLCs and offers unequaled processing capabilities, all in an normalized, standards-compliant package. Comes with OPC Server, Modbus, Profibus or CANOpen protocols.

Century Tools & Machinery Ltd

Booth #3800

Misati

Pneumatic Clamping products for fixturing.

Conception INTERAL Inc

Booth #1125

Interal’s mobile

Interal’s mobile application allow managers to stay in direct constant contact with all their departments and teams, it lets them approve purchase orders and service requests, directly from notifications on their mobile device. This makes all aspects of maintenance and procurement management much easier and definitely faster.

ConnecTek

Booth #1638

QlikView Version 10

With the QlikView business intelligence (BI) solution, you’ll gain real-time business visibility across your entire manufacturing value chain. Learn how you can make business decisions faster, collaborate better with partners and key customers, and improve business agility for intelligent, demand-driven manufacturing.

Cook Fasteners Inc

Booth #2844

Fasteners, Imperial & Metric

18-8ss=Astm A193 B8 Threaded Rods, Astm A193 B8 Heavy Hex Bolts, Astm A 194 Gr 8 Heavy Hex Nuts 316=Pipe Size U Bolts, Machine Screws, Astm A 193 B8m Heavy Hex Bolts, Astm A194 Gr8m Heavy Hex Nuts, Acme Threaded Rods Brass Nylon Insert Lock Nuts 410= Flat Socket Self Drilling Screws

Custom Coolant Equipment Inc

Booth #1739

C600A High viscosity mixing system

A positive displacement mixing system, capable of mixing high viscosity concentrates with water. The Model C600A is able to mix paste concentrated metalworking lubricants with water to virtually any concentration.

Custom Protect Ear Inc

Booth #1738

dB Blocker Hearing Protectors

Breakthrough hearing protection you can hear through. Cheaper to use than earplugs, dB Blockers increase productivity by enhancing conversation and reducing mistakes in noise. Custom fit - every worker enjoys the same exceptional comfort and protection. See how dB Blockers can make your business more profitable.

Custom Protect Ear Inc

Booth #1738

dB Com Communication Connections

Designed to connect radios to dB Blocker hearing protectors, dB Com eliminates a key source of hearing impairment - unprotected exposure to noise when using a radio. dB Com is the only system for connecting radios to hearing protectors. dB Com also vastly improves radio effectiveness in noise.

Cyber Scientific Inc

Booth #3835

Inverted Metallurgical Microscope and Fluorescence Microscope

Our top line inverted infinity metallurgical and fluorescence microscopes arrived. They have supreme optical performance and all come with 5 year warranty.

Data Flute

Booth #1718

DM-BN, Die Mold Precision Cutting Tools.

Data Flute is pleased to introduce our new solid carbide, ball-nose end-mills for hard milling, mold applications. These application specific tools are designed to use the most productive leading-edge, high-speed machining techniques. The result is superior finishes, extended tool life and a work piece requiring little or not handwork.

Delcam

Booth #2732

Delcam for SolidWorks

Delcam for SolidWorks is a SolidWorks Certified Gold Partner. Developed by the largest CAM development company in the world – Delcam for SolidWorks integrates the feature-based technology from FeatureCAM with PowerMILL’s ‘best in class’ multi-threaded toolpath algorithms into one completely embedded solution, through the world-renowned SolidWorks CAD system.

Delcam

Booth #2732

PowerMILL 2011

Delcam has released the 2011 version of its PowerMILL CAM system for five-axis and high-speed machining. This release makes the programming of safe toolpaths easier than ever thanks to new stock-model-engagement options that protect both the cutting tool and the machine from excessive loading.

Delcam

Booth #2732

FeatureCAM 2011

Delcam has launched the 2011 version of its FeatureCAM feature-based CAM system, which incorporates support for 64-bit computers, improved data exchange from a wider range of design software, the ability to use stock models and new strategies across the complete program, from turning to five-axis machining.

DGI Supply a DoAll Company

Booth #208

DGI/Autocrib VisiCab Tool Vending Cabinet

DGI/AutoCrib is delivering next generation industrial vending with VisiCab – Object Recognition. This is an excellent solution for F.O.D. (Foreign Object Debris) control but can be used in any application where 100% of the tools or other items must be returned and accounted for. Visit DGI Supply #208 for demo

Dyna-Pro Environmental

Booth #3641

Bottle-Less Water Stations

Enjoy the convenience and the safety of having your own in-house system to provide for all your consumable water needs at a fraction of the cost of delivered water! No water to order, no running out, no keeping track of billing and deposits, and no security concerns. Don’t landfill, refill!

Easy Abrasives LLC

Booth #3044

Carbide Burs

Solid Tungsten Carbide Burs. Double and Single cut available.

Easy Abrasives LLC

Booth #3044

Wire Brushes

Our Wire Brushes offer continuous brushing action. It is excellent for cleaning and removing paint, scale and light rust from flat surfaces.

Easy Abrasives LLC

Booth #3044

Flap Discs, Wheels and Tungsten Electrodes

Flap discs and wheels are made of VCM premium sand cloth, designed for one-stop grinding, blending, and finishing of metal. Tungsten Electrodes come in a pack of ten.

Econco/CPI

Booth #220

RF power tube

Econco is now selling a new RF power tube for the TRUMPF CO2 laser market. The EI3021CJ is a form, fit and function direct replacement for the RS3021CJ.

Electromate Industrial Sales Ltd

Booth #1238

SCR100 High Precision Cross Roller Linear Stage

The SCR100 stage is an ultra high precision, compact single axis stage that integrates a slide guide, encoder, and Linear Shaft Motor. The SCR100 stage offers higher resolution, speed, and continuous force than standard stepper motors and piezo servomotors.

Electromate Industrial Sales Ltd

Booth #1238

Sterilizable Motors for Medical Technology

For use in high speed medical applications up to 90,000 rpm, Maxon offer two sterilizable 50 Watt brushless servo motors; the “EC Size 5” and “EC 13”. The motors stand out by high power, extremely low-noise and low-vibration operation, marginal heat generation and minimal size.

Electromate Industrial Sales Ltd

Booth #1238

New Kollmorgen AKM™8 Motor Series Delivers Industry-Leading Torque Density for More Compact and Higher Performing Machines

Kollmorgen’s AKM high performance brushless servo motor series offer a wide range of mounting, connectivity and feedback options and is now available in 8 frame sizes, 28 frame/stack combinations and 112 ‘standard’ windings.

Elliott Matsuura Canada Inc

Booths 2300,2400,2216

+GF+ AgieCharmilles Ablation Laser

From GFAC, the new Laser Ablation technology will enable you to produce texturizing, engraving, micro structuring, marking and labelling of 2D geometries to complex 3D geometries. Laser ablation at GFAC enables individualization of products and compared to conventional surface treatment using etching processes, offers economic, ecological and design advantages.

Elliott Matsuura Canada Inc

Booths #2300,2400,2216

Matsuura MAM72-100H

From Matsuura, the new MAM72-100H 5-axis machine offers a dynamic & robust solution for machining hard-to-cut materials, such as titanium or inconel, within the aerospace and other industries.  If you are looking for extended unmanned operation, process integration, and high-precision, the MAM72-100H is your solution.

Elliott Matsuura Canada Inc

Booths #2300,2400,2216

Nakamura-Tome Super NTMX

From Nakamura-Tome, the Super NTMX is the world’s first dual 24-tool ATC magazines machine, a unique design to simplify complex multitasking machining. Full 5-axis milling capability provides high precision and accuracy for manufacturing complex contoured components.  Manufacturers looking for a simple, flexible high performance 5-axis multitasking solution must investigate this Super NTMX solution.

Elliott Matsuura Canada Inc

Booths #2300,2400,2216

Zeiss MICURA

Zeiss, the new MICURA is a premium class and compact, bridge-type CMM.  It features Zeiss active scanning. The MICURA system exhibits high precision (0.9 micron + L/400) with low probing force and is an excellent solution for measurements of close tolerance parts with delicate structures often required in the optical, electronic, and telecommunication industries. Measurement volume is 500x500x500 mm.

Ellison Technologies/ Mori Seiki

Booth #2800

NEW Mori Seiki NLX2500

The all new Mori Seiki NLX2500 X-class Series of high-precision CNC lathes offers extensive features including high rigidity, measures against thermal displacement, energy saving performance and space saving design. In addition, the NLX2500 machines use slideways to offer longer tool life and capabilities for heavy-duty cutting.

Ellison Technologies/ Mori Seiki

Booth #2800

NEW Mori Seiki NVX5100

The Mori Seiki NVX5100 X-Class series machining centre is suitable for a wide range of machining from heavy-duty cutting of castings to high-speed cutting of aluminum. The NVX5100 features a wide work envelope and high-speed machining, while maintaining high rigidity.

Ellison Technologies/ Mori Seiki

Booth #2800

NEW Mori Seiki NHX4000

The NHX Series offers improved cost performance by drastically reducing the number of parts, and is designed to reflect current market needs. It is packed with extensive features including: high speed, high rigidity, high accuracy, and energy savings. In addition, The NHX4000 offers dramatically increased productivity by reducing non‐cutting time.

Empire Machinery & Tools

Booth #2046

DURMA ADR Series Pressbrake

Earlier this year DURMA introduced a new series of economy pressbrakes with many features of our higher priced ADS Series. With a great selection of controls and productivity options this ADR Series Pressbrake now fits not only your productivity needs but your budget as well.

Entire Imaging Solutions Inc.

Booth #1618

Inktronic

Inktronic is a Mark-Up system that allows for tracking changes and adjusting any design irregularities between design teams and manufacturing. With the instant transfer of a paper copy mark-up to an electronic platform, you will promote your green initiative, minimize your waste and reduce your carbon footprint.

Fagor Automation

Booth #2926

Fagor 8065 CNC

High Performance CNC System combining advanced technology with a friendly User Interface. The 8065 is a solution for Milling, Turning, Grinding & General Purpose applications up to 7 axes.

Flexpipe inc

Booth #3133

Custom Flowrack

Pipe and joints system called Flexpipe is a low cost system that allows you to create your own custom flowrack for parts presentation. It can also be used to build carts for parts, productivity boards, custom workstation and much much more!

Flexpipe inc

Booth #3133

Build your own workstation

With Flexpipe, tube and connector system, you can build your own workstation for assembly or sub-assembly. You can easily dismantle the workstation to build another one or modifiy the existing one with limited tools.

Flexpipe inc

Booth #3133

Flexpipe

Flexpipe is a tube and joint system that allows you to make lean projects such as custom flowrack, rack, board, cart or any on-demand custom tool. With this simple system you can quickly build your own material handling tool or asked Flexpipe to make it.

Fonderie Saguenay

Booth #3709

Nopatech

Nopatech™ is a patternless moulding technology developed by Saguenay Foundry. It uses the most recent robotic technologies to machine blank sand mould, skipping the long and costly production of pattern equipment. From CAD to CAST in a week is now the best available process for short production runs and prototyping.

FTool-NA (Sparquetec)

Booth #2545

F-Tool CentroClamp

F-Tool introduces the new CentroClamp, providing economical, rapid yet precise center line clamping of work-pireces for the 5-Axis machine market. Visit www.ftool-na.com for more products or contact information.

FTool-NA (Sparquetec)

Booth #2545

Graphimator

Ohio Carbon Blank Inc. introduces THE GRAPHIMATOR® SAVE TIME & MONEY –-This free online tool (no download required) provides instantaneous pricing for “your size” rectangular and round EDM blanks. Quote or order precision blanks (+/-.0002) or saw cut pieces in many materials including POCO. Go to: www.ohiocarbonblank.com for immediate use.

GTI Spindle Technology Inc

Booth #2340

GTI iPad Vibration Analyzer

A vibration analyzer any one can use. Email, create reports & much more. Don’t pass up starting your predictive maintenance program for less than 10% of traditional analyzers.

Guhring Corp

Booth #2645

RT 100 “US”

The Ultimate Drill For High Heat Applications, Available in 3XD, 5XD, 7XD, Radius “WAVE” Cutting Edge Design, Self Centering 140’ Point Geometry Does Not Require A Spot Drill Operation, Nano-A Coating Improves Tool Life By Resisting Built Up Edge, Tool Design allows for 3-5 Times Higher Feed Rates.

Haco Canada Inc

Booth #2226

Haco Q3 CNC Hydraulic Turret Punch Press

Haco Canada a leader in metalworking machinery, introduces its Q3 line of Turret Hydraulic Punch Presses. Key features include: • User-friendliness for loading, programming, mounting the tooling. • A simple machine-concept without accepting compromises for productivity and reliability. • An optimal price/quality relation which translates itself into a profitable investment. See it at Haco booth 2226

Heidenhain Corp

Booth #2626

The New ACU-RITE® 3500i Touch Screen Control

Based on HEIDENHAIN’s NC kernel and a touch-screen operator interface designed in the spirit of ANILAM with new features including CAM, real-time draw, coarse tool support, and USB communication the Acu-Rite 3500i is available as complete configured kits or OEM configuration.

Hirox-USA Inc

Booth #3716

MXG-2500REZ

Turning the turret allows the operator to access each objective lens and an optical zoom range of over 70 times the minimum magnification. Lens parfocality allows for sustained focus across the entire magnification spectrum from 35x – 2500x.

Hoskin Scientific Ltd

Booth #3719

Nikon ShuttlePix

The ShuttlePix P-400R allows the observer to inspect in a conventional way but also record samples that are difficult or impossible to observe under a conventional microscope. An object can be inspected on site and in it’s correct position without any risk of damaging it.

Hurco Canada Ltd

Booth #1800

VMX42SR

The VMX42SR was designed with a swivel head and horizontal rotary table to meet the demands of 5-Axis machining without taking up the floor space typically required. The VMX42SR includes WinMax® that was specifically designed to simplify programming of complex and multi-sided (3+2)parts.

Hurco Canada Ltd

Booth #1800

TMX10MYS

High performance specifications, meticulous design and rigid construction make for a powerful lathe capable of the most productive multi-tasking jobs. Live tooling and a sub-spindle helps finishing parts on both front and back side. Less setups, less material handling equals greater productivity.

ICAM Technologies Corp

Booth #2930

ICAM Launches Integrated PSE V19!

“Integrated PSE” provides interactive post-processing, machine simulation and control emulation (G-Code Verification) supporting all major CAD / CAM systems, CNC controllers and machine tools. Integrated PSE also provides the means to compute in-process stock geometry to identify, list and display surface gouges, excess material, inaccessible areas and rapid-motion collisions.

In-House Solutions Inc

Booth #2546

Dynamic Milling

Adding to the already extensive High Speed Machining suite of toolpaths, Dynamic Rest Mill and Dynamic Contour join the family. These toolpaths deliver constant cutting conditions, use entire flute length, maximize tool life, and very efficient material removal while minimizing machine tool wear.

International Surface Preparation Canada Ltd

Booth #1945

Eva Beuty

EVA represents the latest in cutting-edge Powered Air-Purifying Respirator (PAPR) technology and design. Offering workers a 1,000 Assigned Protection Factor and a comfortable and reliable respirator system, EVA was engineered with direct input from end-users and experts from the field.

Iron Grasshopper Machinery

Booth #1843

FB-1 Manual Sheet Metal Brake

The FB-1 is a versatile, feature-packed, manual sheet metal brake. Its low cost, small size, easy set-up, and numerous features for handling complex, repetitive bending tasks make it an attractive alternative to a press brake for relatively short bends in light material.

ITC Products

Booth #1315

New Enclosures for Control Equipment

The new “TG” line of polycarbonate enclosures by ITC is designed for housing most types of control and automation components. 9 sizes are available, with different depths, grey or transparent cover. Custom marking, drilling, cutting available. cULus certified, in stock in Toronto.

ITC Products

Booth #1315

In-line Solar Junction Box

The new PV48 junction box is designed to connect quickly and economically, solar cables 4 to 7 mm in diameter, inside an UV-resistant, flame retardant IP-65 rated enclosure. Connection is by means of cage clamps, secure against vibration. Rated 1000V, 15A. Available from ITC in Toronto

JD Neuhaus

Booth #3500

JDN Air Hoists Profi 25TI - 50TI

Strong and powerful the new JDN Air Hoists Profi 25TI up to 50TI which now include the latest brake motor generation and more: •25% less air consumption •Less parts and maintenance •Applicable for horizontal pulling •Oil free operation •Reduced noise level •4 or 6 bar air pressure •Optional hydraulic drive

Johnson Gage Co

Booth #3732

Runout Inspection Gage

Johnson Gage is introducing its newest product for Runout inspection. Precision Datum Rolls, variable indicator mounting arm and CMM Tee-Slot Mounting Stand accommodate part-specific and universal applications. Belt-drive removes operator influence. The JCR-1 is diameter adjustable from 0.125 thru 1.250 inches. Overall system accuracy is less than 3 microns

JW Winco Canada

Booth #1331

GN 303 - Adjsutable Lever with Push Button

GN 303 adjustable hand levers with push button have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position. The insert is connected to the lever via serrations which can be easily be disengaged.

JW Winco Canada

Booth #1331

Retaining Magnet Assemblies

GN 51.3 magnets are a shielded magnetic assembly with rubber jacket. They are especially suitable for applications where the surface is easily marred. Also, these magnets have an increased coefficient of friction, which creates high lateral retaining force.

KMT Waterjet Systems Inc

Booth #1833

KMT Streamline PRO® 100,000 psi Waterjet Pump

KMT Waterjet Systems has launched the Future of Waterjet Technology with the Streamline PRO® 100,000psi Pump. In addition to increasing linear cutting by more than 100%, the PRO® Series of pumps cuts non-linear aluminum, titanium and stainless steel up to 75% faster than standard waterjet systems cutting at 60,000 psi.

Koma Precision Inc

Booth #2138

Elbo Controlli Tool Presetters

KOMA offers a complete range of tool presetters from Elbo Controlli consisting of: LARTH; SETHY; HATHOR; KHYAN; ANKH, and AMON RA. All presetters are equipped with an innovative and exclusive camera vision system, high-precision interchangeable spindles and are constructed of ground granite for thermal stability which ensures accuracy and repeatability.

Komet of Canada Tooling Solutions ULC

Booth #3516

KOMET MicroKom BluFlex

Using Bluetooth® technology, KOMET has separated the display from the tool head making it more convenient to read off the data in a greater variety of ways. When adjusting the precision adjustment head, the user can attach the external display unit in any position within his field of view.

Komet of Canada Tooling Solutions ULC

Booth #3516

KOMET Quatron hi.feed Milling Cutters

KOMET® Quatron hi.feed milling cutters enable continuous drilling and plunge milling with just one tool. A distinctive feature of this tool is the four-edged Quatron® indexable inserts. These inserts also have a radial cutting action, which affords a considerably higher degree of flexibility in plunge and pocket milling.

Komet of Canada Tooling Solutions ULC

Booth #3516

KOMET KUB Centron® Powerline

KOMET has introduced the KOMET KUB Centron® Powerline, a new version of the KOMET KUB Centron® core bit drill. The center drill guides the tool precisely in the drilling axis and ensures dimensional accuracy, straightness and maximum process reliability at drilling depths of up to 9 x D.

Konecranes Canada Inc

Booth #246

Konecranes AirBalancer

Konecranes AirBalancer enhances assembly processes where fast, smooth, precise transfer movements are required. AirBalancer uses purley pneumatic control technology and provides unparalelled functionality and safety with features such as load weight compensation, proportional control and AutoLoad Sensing Balance Control. Custom end effectors are also available to meet your unique requirements.

Lee Spring Co

Booth #1834

LeeP Plastic Composite Springs

LeeP™ Plastic Composite Stock Compression Springs are non-corroding, non-metallic, dielectric, temperature resistant and inert. Suitable for medical, pharmaceutical, imaging, water purification, marine products, food processing, pollution control, chemical processing, electronics, semi-conductors and many other applications. Maximize spring rates and cycle life, minimizing solid height.

Lee Spring Co

Booth #1834

Bantam Mini Compression Springs

Lee Spring responds to customer demand for smaller size designs with Bantam™ Mini Compression Springs, fabricated in corrosion and heat resistant Elgiloy® . Outside diameters range from .025” to .057” with free lengths from .050” to .625”. Bantams are ideal for Medical, Telecom and many other applications.

Leica Microsystems Inc

Booth #3730

Leica A60 Stereomicroscope

The Leica A60 F/S stereomicroscopes make components visible, enable subassemblies to be processed easily, and increase productivity. The Leica A60’s magnification range of 5×-30× permits detailed both observations and overviews. With 46mm, the Leica A60 provides the largest object field of its class.

Lovato Electric Corporation

Booth #1239

Lovato Electric

Lovato released its latest Energy meter DMG series. Graphic LCD technology allows easy and intuitive menu navigation. Our DMG series has high measurement accuracy, wide range of power supply, Communication via Ethernet, USB, RS485 and RS232. Harmonic and wave form captures available directly from the display. Visit us for more details.

LS Walker Machine Tools Inc

Booth #2826

Fermat

Fermat Machinery from Czech Republic introduces new CNC Floor type Boring Mill with tilting Headstock for productive machining of Windmill Hubs. The machine allows for complete machining in one setup!

LVD Strippit    Booth #1926

PPEC-7 80/25 PRESS BRAKE

LVD Strippit’s PPEC-7 80/25 precision hydraulic press brake provides 90 tons of bending force with seven CNC-controlled axes. A rugged one-piece frame ensures bending accuracy. Backgauge range is 39.4”. V-axis crowning system delivers consistent bending results on longer workpieces. Features the powerful yet easy-to-use CADMAN® Lite touch screen control.

Lyndex-Nikken Inc

Booth #232

Shrink Fit Unit

Compact and economical, Lyndex-Nikken new shrink fit unit is the only one on the market to shrink and unshrink 2 to 40 mm (0.079-1.575 inch) tools and cutters’ shank sizes of any type (HSS, Carbide, Heavy metal, Powdered Metal, etc) with the same inductor! No transformer necessary and easy set-up.

M & H Probing Systems

Booth #2342

PC-Dmis NC Gage software

PC-DMIS NC Gage frees you from the complexity of programming complex macros by providing a simple icon-driven interface with a unique teach-in process allowing the operator to perform even complex measurements quickly and easily right at the machine and deliver results in a simple color-coded report.

Machine Tool Solutions Ltd

Booth #244

Machine Tool Solutions Ltd.

Mts offers a complete range of intelligent workholding to improve productivity

Magnus Chemicals Ltd

Booth #2945

MagCool

The MAGNUS MagCool series is an exceptionally high quality line of non-chlorinated, water soluble, coolants suitable for all metals and providing excellent sump life and odor elimination. MagCool 2390 Gold quality for extreme conditions MagCool 2370 Silver quality for medium duty applications MagCool 2350 Bronze quality for cost sensitive applications

Mahr Federal Inc

Booth #3726

Surface Roughness Option for MarForm MMQ 200

Mahr Federal has introduced a new option package for their MarForm MMQ 200 Formtester. With the combined hardware/software MMQ 200 Surface Finish option, operators will benefit from reduced set-up and measurement cycle time, and reduced cost by needing only a single piece of equipment for both form and surface measurements.

Mahr Federal Inc

Booth #3726

Mahr Federal’s Enhanced MarCal Digital Calipers

Mahr Federal has introduced a new generation of its popular line of MarCal digital calipers. Included are a number of innovations, such as lapped guideways, a new Reference System which retains the zero position setting, and an increased number of product options and accessories.

Mahr Federal Inc

Booth #3726

Mahr Federal Introduces Next Generation µMaxum® Digital Indicators

The enhanced µMaxum II line offers a wide range of new features, including: Dynamic Max, Min, TIR; two point difference measurement; Multiplier Factor for ratio measurements; indicator serial number identification; resolution to 10 µin; selectable continuous output; and longer battery life.

Marsh Metrology

Booth #242

Mobile On-site Calibration Lab

Our New Mobile Calibration Lab provides class II environment for Physical, Dimensional and Electrical gauges and tools and standards at your site location. ISO 17025 & ISO 9001. www.marshmetrology.com 1 888 800 2624. Ron Bake - General Manager

Mascoutech Inc

Booth #1612

KARNASCH Drill-Line with Durablue coating

Made of ASP powder steel for drilling difficult materials like rails, stainless and very hard steels. Durablue coating unique to Karnasch for extreme surface hardness and more lifetime. Available in sizes 6 to 27,5mm - internal cooling supply and ¾ Weldon shank from 17mm. KARNASCH& CLOSER TO PERFECTION!! Mascoutech-Stand #1612.

Masteel America Corp

Booth #160

Maxcut CNC Horizontal Boring Mill

Special Features at Unbeatable Price -6 Axis position control-X Y Z W U B -2 Axis Circular Interpolation -X/Y axis -Facing and boring circle with Z/U axis -Taper Boring and threading with Z/U - Grooving cycle: internal, external and face -Optional spindle speed at 2800RPM -Optional coolant through spindle -And more-----

Masteel America Corp

Booth #160

Masteel Hydraulic Synchronized CNC Press Brakes

MASTEEL MBHSA series CNC Brakes with simple TP-700 control on Y1/Y2/X axis allow in-experienced operator to do the job with min training-- MASTEEL MBHS series CNC Brakes with KV-2004 graphic control are built with simulation and optimum of bending sequence, automatic calculation on Y1/Y2/X/R axis position and Crowning pressure --

Masteel America Corp

Booth #160

MCG-5X Gantry type 5 axes machining center

•high speed spindles: 12000/15000rpm direct drive Or 18000/24000rpm electronic spindle •5 axes simultaneous machining function finish workpiece with complex contours in just a single machine setup •The highly-rigid,built-in tilting rotary table: tilts 225°(A-axis) and rotates 360°(C-axis) •Twin magazine-2x32 tool capacity allows the tool setup during machining •Table capacity at 2700Lbs

Memex Automation Inc

Booth #1135

Ax-RFID

RFID for manufacturers with both active and passive technology we can track and monitor any asset in your manufacturing plant. Memex tags are housed in water resistant, high temperature PET or ABS materials. Memex redefines active RFID technology through innovative approaches to employing RFID for asset tracking, tracing and management.

Memex Automation Inc

Booth #1135

AxOEE

AxOEE is a Manufacturing Productivity Tool for Real-Time Machine Monitoring enabling increased productivity through tracking OEE. It is cost effective, proven, expandable, fitting to all machines. Benefits include: Real-time production visibility; Automated data collection; Production reporting; Downtime and reject cause analysis; Labor tracking; scheduling; Shop Floor to Top Floor Connectivity.

Multicam Canada

Booth #1626

MultiCam Introduces the 3000 Series WaterJet using KMT Intensifier

The MultiCam 3000 Series Waterjet cutting systems are pushing the limit when it comes to capabilities combined with a user-friendly interface. The 3000 Series WaterJet using KMT Intensifier units are an affordable, easy-to-use, production cutting solution designed for manufacturers that want the ability to cut a wide variety of materials.

Multicam Canada

Booth #1626

3000 Series CNC Router

MultiCam’s 3000 Series router is designed for a wide range of medium-duty panel processing applications. 3000 Series machines feature rigid all-steel plate frame construction, all-steel moving-gantry design, ATC (automatic tool change) option, 25mm linear ball bearing profile rails for maximum stiffness, MultiCam EZ Control User-friendly operator interface, and more.

Multicam Canada

Booth #1626

1000 Series CNC Plasma

The MultiCam 1000 Series Plasma features dual x-axis drives, an engineered aluminum extrusion frame, 25mm bearings throughout, Hypertherm plasma units, user-friendly MultiCam Controller, and more. 1000 Series machines are available in widths up to 80” and lengths up to 240”, offering heavy-duty performance at a very affordable price.

Multicyl Inc

Booth #2539

MultiPunch Linear Rail Systems for DL Series

Shown is an MLR system using four 20 ton DL series Multicyls to power Unipunch tooling. Adjustable Y axis, and quick change set-up accommodates punching various lengths and hole combinations. The DL series is a new introduction to our MLR package, previously used with smaller MC and XL series Multicyls.

New Age Robotics & Controls Inc

Booth #1018

Automated Sculpting/Milling System

A seven axis robot and turntable system is used to mill 3D laser scanned shapes in plastic, wood, foam & stone. Used for large mold making, artistic work or statue making.

O’Brien Installations Limited

Booth #1200

O’Brien launches MET-TRACK® Workstation Bridge Cranes

O’Brien Installations Limited is proud to announce the launch of MET-TRACK® Workstation Bridge Crane systems. These easy to use, turn-key, light rail systems are manufactured by O’Brien Installations Limited in Ontario and are available across Canada. Come see North America’s original enclosed track profile at booth 1200.

OSG Canada Ltd

Booth #3626

OSG Phoenix

OSG Canada will introduce the OSG Phoenix Indexable Carbide Cutting Tool series at CMTS 2011. OSG Phoenix provides optimal performance and tool life in a variety of milling applications and work materials including steel, stainless steel, cast iron, aluminium, exotics and hardened steels.

Pruftechnik Maintenance Technology Service Inc

Booth #3145

ROTALIGN® Ultra Shaft Expert Multiple Coupling

Measure and align multiple coupling simultaneously. The shaft alignment of machine trains with two or more couplings can now be achieved within the shortest possible time. With only one twist ROTALIGN® Ultra measures simultaneously and continuously the alignment condition of up to 5 couplings.

Pruftechnik Maintenance Technology Service Inc

Booth #3145

LEVALIGN® Expert - a levelling and flatness measurement system

LEVALIGN® expert – a levelling and flatness measurement system with spinning laser.Geometric measurements made simple. The horizontal and vertical self-levelling spinning laser with dia. 200 m measurement range in conjunction with a 70mm range sensor ensures quick one-man operation for wide-ranging measurement tasks.

Pruftechnik Maintenance Technology Service Inc

Booth #3145

ROTALIGN® smart EX

ROTALIGN® smart EX is a high-end laser shaft alignment system designed for the use in potentially explosive atmospheres. The package integrates the OPTALIGN® smart EX computer packed with powerful capabilities and the unique benefits of the 5-axis ROTALIGN® EX sensor measurement technology.

Rhino Cutting Systems Inc

Booth #1245

2D/3D Plasma/Oxy Fuel Cutting Machine

Plasma and Oxy-Fuel cutting machines that are scalable in size, feature facility for bridge mounted CNC and Drives, Multiple Torch Stations, High Traverse Speeds, Rack & Pinion axis drives with preload mechanism, replaceable rails, highly engineered, rigid construction to minimize motion-induced vibrations.

Romquest Technologies Corp

Booth #3810

BELEC VARIO LAB

High-performance optical emission spectrometer for the most accurate and extensive metal testing. It is a very robust and reliable spectrometer, with up to 11 bases and 108 measuring channels possible. Made in Germany.

Romquest Technologies Corp

Booth #3810

BELEC LAB 3000

Compact optical emission spectrometer for metal analysis. Top grade instrument, providing high accuracy in metal testing. Economical for small and medium sized enterprises. Up to 3 base modules, maximum of 24 elements channels. With options like trolley, stand, adapters, it offers maximum flexibility for non-destructive material testing. Made in Germany.

Sandvik Coromant

Booth #2538

3 new styles of inserts for the CoroMill 316 exchangeable head milling system.

October 1st sees the launch of 3 new styles of inserts for the CoroMill 316 exchangeable head milling system. The 3 new designs of end mill, each with 2 cutting edges, are perfect problem solvers with maximum strength and security.

Sandvik Coromant

Booth #2538

Coromant Capto® size C10

For all types of heavy machining operations in large components, Coromant Capto® size C10 will improve performance by allowing higher feeds and greater depths of cut. A flange diameter of 100 mm means a coupling suitable for heavy loads providing extreme stability in your milling and turning applications.

Sandvik Coromant

Booth #2538

GC1040 - Tough enough to stay sharp in stainless steels

In the extreme tough machining of austenitic stainless and duplex materials GC1040 is our first-choice recommendation for shoulder milling with small diameters in fine to medium roughing, this grade is ultimately secure in unstable conditions and safe for unmanned production, time after time.

Schunk Inc

Booth #196

SCHUNK HYDRAULIC TOOLHOLDER TENDO-EC

The NEW hydraulic toolholder TENDO-EC from SCHUNK delivers unheard of clamping torque. Up to 900Nm under dry conditions with a maximum runout of .003mm. Can increase tool life up to 40%, resulting in huge savings. It is the ideal tool for milling, reaming,drilling and tapping. Balanced up 25000 RPM at G2.5.

Schunk Inc

Booth #196

ROTA TP/TB/EP SELF-CONTAINED AIR CHUCK

The ROTA self-contained power chucks from SCHUNK is equipped with an integrated pneumatic cylinder. The force transmission is effected by the proven wedge hook system. The chuck contains an air supply system on the distributor ring. Therefore no rotary feed throughs are necessary.

Schunk Inc

Booth #196

SCHUNK PGN plus UNIVERSAL GRIPPER

Universal 2-Finger Parallel Gripper with large gripping force and high maximum moments thanks to multi-tooth guidance. Ideal standard solution for numerous fields of application. For universal use in clean to slightly dirty environments. Special versions available for dirty environments.

Scott’s Directories

Booth #5096

Scott’s Directories

Scott’s Directories is your pre-eminent source of reliable business information products and marketing services designed to help organizations succeed. In addition to North American manufacturers, B2B services and industrial and medical databases, we have over 5,000,000 qualified executive emails and the capacity to professionally handle your next eBlast campaign.

Sheridan College Institute of Technology & Advanced Learning

Booth #3801

Mechanical Technician Tool Making Co-op Diploma Apprenticeship Program

This coop program allows students to complete the required in-school curriculum for an apprenticeship, gain valuable work experience and earn a two-year technician college diploma. Students are trained in Sheridan’s unsurpassed skilled trades training facility and receive plenty of hands-on shop experience. Additional programs: Precision machining, welding, plumbing and electrical.

SIA Abrasifs JJS

Booth #3618

Spectrum wheels

Spectrum wheels are conceived for your metal finishing solutions. New concept of identifying unitized wheels. Color coded for ease of use and reference. Open structure reduces heat, clogging and glazing.

SIC Industrial Marking Canada Inc

Booth #1719

Cabinet laser Marking

Come and witness how SIC Marking designed the c173l-g cabinet laser marking system using it’s usual industrial ruggedness and ease-of-use guidelines We will also be displaying our latest portable and column-mounted electromagnetic dot-peen markers to ensure a real-time hands-on response to all your permanent part marking & traceability requirements.

Single Source Technologies- Canada

Booths #2238,3326

PS Series Vertical Machining Center

The Makino PS series VMCs are the new production standard, offering a reduction in part cycle times, increased productivity and improved quality. The PS series comes fully equipped and ready to run with many standard features.

Solaxis Ingenious Manufacturing

Booth #1343

Additive Manufacturing (Rapid prototyping)

We manufacture complex plastic parts with FDM and SLA technollogies. We produce real functional parts in small series. We also produce functional prototypes, moulds, jigs and tooling made of sophisticated plastics and resins. Our largest envelope of production is 36” x 24” x 36”.

Solaxis Ingenious Manufacturing

Booth #1343

Advanced reverse engineering services

We offer computer-assisted design services, 3D scanning and modeling as well as finite element analysis. Our professionals use state of the art technologies to ensure best possible results and services.

sp3 Cutting Tools

Booth #3839

UE2 ENDMILL

The new SP3 Diamond UE2 ENDMILL securely holds PCD cartridges with 2 clamping screws, is adjustable for perfect T.I.R. and allows cartridges with .250” - 1.000” length of cut. Special cartridges can also be readily designed for custom milling applications.

Speedgrip Inc

Booth #1716

OD-6500 standard External Collet Chuck

The OD-6500 a highly accurate and robust standard external collets chuck. Engineered to quickly mount to any typical machine spindle. Has interchangeable adapters, inboard or outboard workstops, standard collets that change in one minute, with a 6 ½” thru hole capacity making it the most versatile chuck on the market

Stratasys Dimension 3D Printing

Booth #1339

Fortus 250mc 3D Production System by Stratasys

Ideal for budget-minded buyers, the new Fortus 250mc 3D Production System is powered by Insight software, so customers can access more file processing options to customize build speed, part accuracy and surface finish. These options become important when moving from prototyping into manufacturing tools and production parts.

Sumitomo Electric Carbide Inc

Booth #3708

AC410K/AC420K

The AC420K performs exceptionally in cast iron roughing applications involving medium to heavy interruptions. AC420K is a new black Sumitomo Super FF CVD coated grade. Its coating layers of TiCN for wear and chipping resistance, and Al2O3 layers for excellent wear and heat resistance improve cast iron grade tool life.

Sumitomo Electric Carbide Inc

Booth #3708

GS Series Solid Carbide Drills

GS drills are the next generation of solid carbide drills. The GS drill allows for higher speeds due to the ultra-wear resistant DEX coating. Also the new geometry of the GS drill provides greater cutting strength and reduced cutting forces as well as excellent chip control.

TE-CO

Booth #3718

Vises for 5-Axis Applications

The new Toolex Vise is ideal for 5-axis machining and small work envelope machining centers. Clamping pressures up to 6,000 lbs with only a 4” x 4” x 6.5” footprint. Steel body with quick change jaws with repeatability of +/-.0005.

TE-CO

Booth #3718

TE-CO Locator Jaw Parallel System

The new TE-CO Locator Jaw system allows the user to quickly and accurately swap out parallels and soft jaws, drastically reducing set-up times. Simply bolt the Master jaws to the vise’s carrier jaws and then snap parallels and soft jaws in and out. Also includes built in workstops.

Teleline Canada Ltd

Booth #3144

ED - The Emergency Display Kit

ED (Emergency Display) is a multi-scanning LCD monitor that can run on any power, displays any signal and operates on any machine. ED reduces costly production downtime due to faulty monitors, reduces costly OEM replacements, eliminates costly monitor repairs and reduces costly spare monitor inventory. ED-your factory floor defibrillator.

Teseo Canada

Booth #3603

VP Flowscope DeltaP

The VPFlowScope dP is the first all-in-one insertion mass flow that can measure in saturated air. The patent pending design of the sensor-tip makes the VPFlowScope dP is extremely resistant to dirt and water drops. The VPFlowScope dP gives also read out of pressure and temperature and has an integrated logger.

Teseo Canada

Booth #3603

VP Vision

VP Instruments provides the industry with insight into their compressed air and gas consumption as well as their savings potential. Our focus is on measuring and visualizing flow and costs of compressed air, nitrogen and technical gases; we show our clients why, how, where and how much they can save.

TH Industrial Solutions Inc

Booth #2947

Micromag Magnetic Filter

The Micromag filter removes ferrous material from coolants and cutting oils. The filter is environmentally responsible since fluids can be recycled and there are no consumables. Typical applications include, grinding, honing, CNC and EDM processes.

Third Wave Systems Inc

Booth #2944

AdvantEdge FEM 5.8

AdvantEdge FEM version 5.8 is a material physics-based software solution for optimizing metal cutting, providing detailed information about chip formation, temperatures, stresses, and forces for machining processes. The technology provides users with data not available from trial-and-error tests, making it an invaluable tool for cutting tool design and analysis.

Top Yes Precision Metal Products Co

Booth #1830

Third party Certified Gaging / Fixtures

Third part certified Gage/Fixtures. Complete design and manufacturing of part checking Gages and Fixtures for metal stampings. All gages are Third Party Certified. High precision machining to customer tolerances.

TopTech Tool Manufacturing Inc

Booth #3834

Diamond Wheels

TopTech Tool Manufacturing Inc

Booth #3834

Thread Chasers

TopTech Tool Manufacturing Inc

Booth #3834

PCD & CBN Tipped Cutters

Toycen Industries

Booth #1943

CUTTERMASTER PROFESSIONAL

The Cuttermaster Professional CMX has been designed with new features to meet the demands of today’s prototype and production shops, and provides superior flexibility and ease of use for tool regrinding and tool modifications. End Mills up to 2 inch, Drills Counersinks, Hoggers, annular cutters,saws, reamers. reduced necks and flats. www.cuttermasterprofessional.com

Toyoda Machinery USA Corp

Booth #3338

STEALTH VMC

STEALTH Vertical Machining Centers are the new evolution in job shop performance. Engineered to precisely manuever through challenging materials and deliver long-lasting accuracy. Reinforced by Toyoda’s unsurpassed service and support. Steal business with your new strategic advantage.

Trotec Canada

Booth #1317

Speedy 300 Flexx Laser Marking and Cutting System

The first laser system that allows you to switch between a CO2 laser source and a fiber laser source with the click of a mouse. This is the Canadian debut for the Speedy 300 Flexx; one system with the Flexxibility to handle almost any task.

TRUMPF Canada

Booth #2000

TruPunch 3000

The TruPunch 3000 features electric punching head technology and averages electrical consumption of about 5 kW, making it very energy efficient. It is also the first machine to offer skeleton-free processing, resulting in an average of 10% higher material utilization. Only TRUMPF offers this technology. Automation options are also available.

TRUMPF Canada

Booth #2000

TruLaser 5030 fiber

The TruLaser 5030 fiber, with TruDisk solid-state laser, cuts thin sheet metal and reflective materials at high speed. In fusion cutting of stainless steel up to 4mm, feed rates are up to three times faster than the CO2 version reducing processing time by up to 45%, significantly reducing part cost.

Tutelar Technologies Inc

Booth #1634

Ujigami Product Directed Manufacturing System

Lower your costs and improve quality by engaging everyone and everything on the shop floor. Provide your operators with real-time graphical instructions and the ability to respond immediately to manufacturing variation. Ujigami PDMS is shop floor operations software that delivers web-based speed, power, flexibility, and ease-of-use.

University of Ontario Institute of Tech (UOIT)

Booth #3608

Automotive Centre of Excellence (ACE)

The Automotive Centre of Excellence (ACE) is the first testing facility of its kind in Canada and is now available to rent by the general public. It offers full-size chambers that allow for full climatic and lifecycle testing, including one of the largest climatic wind tunnels in the world.

Vektek Inc

Booth #3817

Vektek TuffCam Swing Clamp family expands.

Vektek, Inc., Emporia, Kansas, has added to the family of TuffCam™ Swing Clamps. The TuffCam™ Swing Clamp, known for accurate arm positioning and smooth rotation, is now available in Long Stroke and 5,000 lb capacity models. For more information contact Vektek at: 800-992-0236, sales@vektek.com or visit www.vektek.com

Walter Canada

Booth #2038

F4050 Milling cutter

Walter is introducing a new standard for the high-speed milling of non-ferrous materials with its F4050 cartridge type cutter. Rarely has a PCD tool exhibited such a favorable cost/performance ratio. The F4050 is the first choice wherever the quickest machining times are demanded and large quantities of swarf are involved.

Walter Canada

Booth #2038

New Tiger∙tec® Silver Milling Grade

The newly developed Tiger∙tec® Silver WKP25S milling/cutting material will maximize productivity andincrease process reliability. It’s designed to process all steel materials at high cutting speeds as well as average feed rates. Tiger∙tec® Silver WKP25S can also be used in difficult conditions such as wet machining or high tensile strength materials.

Walther Quick Coupling Systems

Booth #3733

New ss clean break couplings for 250 bar

The new CP series quick couplings were developed for water hydraulics and other critical applications. They allow connections to be made or broken without spilling into the environment as similar couplings do. Material and seal options make them applicable in most industries. Elimination of cleaning operations and fluid loss reduce cost.

WEICON Inc

Booth #3512

Flex 310 M® 2 K

Fast-curing, elastic two-component adhesive and sealant on a hybrid polymer basis. Especially suitable for structural and permanently elastic bonding in industrial manufacture and assembly. The two-component system also enables surface-to-surface bonding of bigger parts and fills gaps up to max. 10 mm.

WEICON Inc

Booth #3512

Bio-Cut

Bio-Cut allows higher cutting speeds, longer tool life and increased cutting performance, thanks to its highly efficient lubricating effect. Bio-Cut is free of mineral oil, chlorine, sulphur, barium, lead, chrome, cadmium, nitrite, PCB and formaldehyde.

WEICON Inc

Booth #3512

Contact Spray

WEICON Contact Spray is based on a special combination of active ingredients for the care and protection of electrical contacts and components. Dispels moisture from electrical contacts, prevents leakage current and voltage loss and keeps contacts, fuses, cable connections, etc. free of oxidation and sulphide deposits.

Western Union Business Solutions

Booth #3814

Western Union Business Solutions

Western Union Business Solutions, a global leader in foreign exchange operating in international markets with access to over 140 currencies. Through our account-to-account payment platforms, international payment tools, currency risk management solutions, and financial service partnerships, we help clients improve cash flow, manage currency risk and seize global market opportunities.

Westway Machinery Ltd

Booth #2016

SAFAN E-Brake

As the specialist in bending sheet metal, Safan offers the revolutionary SAFAN E-Brake, the first servo-electronic press-brake in the world. A revolutionary feature is its servo-electronic drive system based on the pulley principle, which ensures a very even distribution of forces, in 98% of cases no crowning table is required.

Westway Machinery Ltd

Booth #2016

SAFAN

As the specialist in bending sheet metal, Safan offers the revolutionary SAFAN E-Brake, the first servo-electronic press-brake in the world. Environmentally friendly technology without oil, low-noise operation and maximum ergonomics are the SAFAN E-Brake’s strengths. The machine can reduce energy consumption by up to 50% compared to a hydraulic machine

William Brennan Ltd

Booth #1826

Ercolina TB76 Offers Touch Screen

Ercolina’s rotary draw TB76 is ideal for producing consistent bends in pipe, tube, squares, rectangular, and other profiles to a 3 inch capacity and a center line radius as small as 2D. Optional two-axis positioning table increases productivity for multiple bends in two planes. William Brennan Co. Both 1826 519-455-7100

William Brennan Ltd

Booth #1826

New and Improved Scotchman CPO 315RFA Automatic Cold Saw

Scotchman’s new CPO315RFA Roll Feed Automatic Cold Saw provides uninterrupted cutting and supplies the highest quality of cuts. The NEW Touch Screen Control stores profile settings (Speeds and Feeds) and is ideal for high volume and long length applications. William Brennan Co. Booth 1826 Phone:519-455-7100 www.scotchman.com

William Brennan Ltd

Booth #1826

Scotchman Saw Gear Measuring System

The new Scotchman Saw Gear Measuring system is a low cost way to automate your process. Slash set up and production time while improving accuracy. See the latest cost reducing features.

YMT Inc

Booth #2644

QUASER MF-400 Compact 5-Face VMC

The QUASER MF400 5-face machining center from Quaser is the most economical 5-face machining center in its class. With 12.75” x 11.8” maximum work piece size, the MF400 is ideal for complicated work pieces that require multiple setups.

YMT Inc

Booth #2644

QUASER MV204 High Performance VMC

Introducing MV204 high performance VMC from QUASER. With table size 1,700 x 700mm, and XYZ travel of 1,500/700/610mm in a very compact foot print. An ideal and capable machine for any size of job shop.

YMT Inc

Booth #2644

YMT BML-630 Turning Center

Introducing the new heavy duty, high performance BML-630 with Boxway construction from YMT. 35hp spindle motor with 2-speed gear box, 12” hydraulic chuck, fast 10 position turret and a larger ø630mm swing. Visit Booth#2644 for more detail and product demonstration.