- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
More from Canadian Metalworking
Engaging the oilfield
- By Canadian Metalworking
- Dec 9, 2019
- Made In Canada
- Article
Alberta manufacturer looks for a way to bring more production back in-house by replacing an older-model horizontal machining centre.
CMTS keynote looks to the future of manufacturing
- By Canadian Metalworking
- Sep 10, 2019
- Management
- Article
Before his keynote speech at CMTS (to be held Monday, Sept. 30, at 9 a.m.), Canadian Metalworking (CM) asked Ric Fulop, co-founder and CEO of Desktop Metal, for his thoughts on AM as a disruptive technology.
CMTS 2019 at a glance
- By Canadian Metalworking
- Sep 9, 2019
- Metalworking
- Article
Set for Sept. 30 to Oct. 3 at The International Centre, Mississauga, Ont., CMTS is the biggest event of its kind nationwide.
Technology Spotlight: Water-based AM system
- By Canadian Metalworking
- Jul 16, 2019
- Metalworking
- Article
New system to 3D print strong, complex metal parts for prototyping and end-use applications uses a water-based metal paste, rather than the powders and wires typically used in AM applications.
Designed for spines
- By Canadian Metalworking
- Jul 8, 2019
- Metalworking
- Article
Implants created using additive manufacturing mimic the mechanical properties of bone, resulting in better patient outcomes.
Technology spotlight: Toolholders
- By Canadian Metalworking
- May 3, 2019
- Cutting Tools
- Article
The variety of toolholding systems provide the manufacturer with multifold options for effective toolholding, depending on production targets and available machinery.
Technology Spotlight: Vibration-free boring tools
- By Canadian Metalworking
- Feb 18, 2019
- Cutting Tools
- Article
The vibration-free system has been shown to offer better boring performance in applications up to 10xD.
Finding value in fluid recovery
- By Canadian Metalworking
- Nov 29, 2018
- Metalworking
- Article
SituationAnthony Screw Products Ltd., Burlington, Ont., is a precision machining company that produces numerous custom parts, including fittings, washers, nuts, bolts, and pulley hubs. With more than 25 years of experience working in every position in the plant’s manufacturing process, company...
Entering the aerospace supply chain
- By Canadian Metalworking
- Oct 3, 2018
- Made In Canada
- Article
In 2015 Canada’s aerospace industry contributed close to $25 billion in GDP and nearly 190,000 jobs to the Canadian economy. It’s an industry segment that focuses on innovation and is not afraid to implement the latest technologies.
New dressing technology improves processing of exotic materials
- By Canadian Metalworking
- Sep 26, 2018
- Metalworking
- Article
The grinding wheel receives a high grain clearance for maximum cutting capability, lower grinding forces, and low burning risk.
Manufacturers seek new technology, networking at IMTS
- By Canadian Metalworking
- Aug 20, 2018
- Metalworking
- Blog Post
The International Manufacturing Technology Show (IMTS) 2018, Sept. 10-15, takes place once again at Chicago’s McCormick Place.
Line boring repairs worn bores
- By Canadian Metalworking
- Jun 4, 2018
- Metalworking
- Article
Investment in equipment shortens timelines for engine overhauls, increases efficiency, introduces new opportunities, and retains the expertise and work in Canada.
A look at tapping
- By Canadian Metalworking
- Apr 26, 2018
- Cutting Tools
- Article
Tap breakage is sure to occur if the setup is wrong, and removing a broken tap from the workpiece is labour-intensive.
Technology Spotlight: Compensating chuck technology
- By Canadian Metalworking
- Feb 19, 2018
- Metalworking
- Article
To get the proper results for grinding, Powerhold retrofits the chuck with a fixed centre housing with a high-accuracy carbide dead centre.
Eccentric turning becoming conventional work
- By Canadian Metalworking
- Feb 14, 2018
- Metalworking
- Article
What should a job shop do when an order for a part comes through the door that needs eccentric turning? The answer, surprisingly, may actually start with a milling operation.
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of Canadian Metalworking.
Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.
- Trending Articles
How I lost my machine tool
BlueForge Alliance partners with Nuts, Bolts & Thingamajigs to develop Submarine Manufacturing Camps
Portable system becomes hot tech in heat treatment
Orbital tube welding webinar to be held April 23
Cidan Machinery Metal Expo 2024 to be held in Georgia May 1-2
- Industry Events
MME Winnipeg
- April 30, 2024
- Winnipeg, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Windsor Seminar
- April 30, 2024
- Windsor, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Kitchener Seminar
- May 2, 2024
- Kitchener, ON Canada
Automate 2024
- May 6 - 9, 2024
- Chicago, IL
ANCA Open House
- May 7 - 8, 2024
- Wixom, MI