More torque output for Cadillac's ATS Coupe 2.0T

Cadillac has increased the torque output of the 2.0L turbo-four cylinder in the 2015 ATS. ATS models equipped with the 2.0L turbo-four are rated at 295 lb-ft of torque (400 Nm) and 272 horsepower (203 kW).

Cadillac engineers and designers have worked at providing customers with a brand new experience. The the 2015 ATS Coupe, has enhanced features of the award-winning ATS Sedan to deliver the performance and styling traits luxury coupe buyers expect.

“The ATS is already the most agile vehicle in its respective classes,” said David Masch, Cadillac ATS chief engineer. “The additional torque works to further improve on an already dynamic vehicle.”

The ATS Coupe goes on sale later this month, starting at $41,240, plus a $1,800 destination charge.

Cadillac has enhanced the torque output by equipping vehicles with the 2.0L turbo four-cylinder engine. They also have added available safety-enhancing lane-changing and lane-keeping technologies. These new additions highlight Cadillac's vision for developing luxury sport models.

The additional torque — 295 lb-ft of torque (400 Nm) and 272 horsepower (203 kW) — was achieved through engine calibration that results in increased boost pressure for improved performance over the class-competitive torque level available at the launch of the ATS Sedan.

At 136 hp/L, the 2.0L Turbo is one of the most power-dense engines in the industry. It also delivers 90 per cent of its peak torque from 2100 rpm to 3000 rpm and the full 295 lb-ft of peak torque (400 Nm) from 3000 to 4600 rpm. The broad torque band is supported by high boost levels in the speed range, which is designed to give the lightweight ATS Coupe a feeling of immediate power on demand.

Lane Change Alert works in tandem with the available Side Blind Zone alert to warn drivers of rapidly approaching vehicles, looking approximately 25 metres (82 feet) from the side mirror. Drivers are warned that it may not be safe to change lanes with a flashing symbol in the side mirror, depending on which turn signal has been activated.

The Lane Keep Assist system operates above 60 km/h (37 mph), using a forward-facing camera that detects if the vehicle leaves the lane unintentionally. When detected, the system engages the electric power steering to give a momentary nudge and prevent crossing the lane markings, aligning the vehicle in the lane. Lane Change Alert and Lane Keep Assist are available on both the 2015 ATS Coupe and Sedan Performance and Premium Collection.

SOURCE GM Canada