- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Products - Page 232
Linear finishing set suitable for rough stock removal, cosmetic finishing
- Jun 1, 2016
- Metal Finishing
- Product Release
Pferd Inc. has introduced a new linear finishing set for applications including rough stock removal, surface conditioning, and cosmetic finishing on all metals. The set includes a 5-in.-dia. POLINOX® nonwoven PNZ finishing drum, featuring interleaved layers of nonwoven material and abrasive...
Single-phase SMAW systems offered
- Jun 1, 2016
- Welding
- Product Release
Fronius has developed the TransPocket 150 and the TransPocket 180 single-phase SMAW systems. A digital resonance inverter helps ensure perfect weld properties in a variety of applications. Power factor correction technology helps make the compact systems energy efficient. The new models can use...
Aluminum GMAW guide updated
- Jun 1, 2016
- Welding
- Product Release
Lincoln Electric has released an updated guide for aluminum GMAW. The manual features a new, reader-friendly layout with updated information and photos of products and processes. The guide offers a detailed look at filler metal types, filler metal selection considerations for welding, tips for...
Flux-cored wire offers high deposition rates, travel speeds
- Jun 1, 2016
- Welding
- Product Release
Hobart has announced the availability of its new FabCO® 85HXP gas-shielded, flux-cored wire. The wire offers increased deposition rates and travel speeds for welding materials up to 8 in. thick. It is suitable for flat and horizontal welding of earth-moving equipment, nonalloyed and fine-grain...
Drill/tap/mill machines have expanded travels
- Jun 1, 2016
- Metalworking
- Product Release
Haas Automation has expanded its drill/tap/mill line with the DT-2 and DM-2, which have an additional 203 mm of X-axis travel and table length, with only a small increase in footprint. The DT-2 and DM-2 have identical specifications, except for spindle taper and tool changer. The DT-2 is a...
Mill/turn machine enables 4-axis simultaneous turning
- May 31, 2016
- Metalworking
- Product Release
GF Machining Solutions has introduced the Mikron MILL P 800 U ST (simultaneous turning). This machine provides 800 mm of X-axis travel, an 800-RPM C-axis rotation speed, and a maximum table load of 800 kgs. The combination of milling and turning technology in a single machine helps...
Turning/milling centers machine complex chucked parts
- May 30, 2016
- Metalworking
- Product Release
EMAG’s VMC MT series of turning/milling machines are suitable for chucked parts with complex geometries. Whether they are used for prototype production or for fast changes in small production runs, these machines have ergonomic accessibility of the machining area and the bottom-mounted...
5-axis VMC creates prismatic parts
- May 27, 2016
- Metalworking
- Product Release
Doosan has introduced the DNM 200/5AX 5-axis vertical machining center (VMC). This newest member of the DNM series is suitable for machining complex prismatic parts by reducing setup time and ensuring consistent accuracy without taking up too much valuable space on the shop floor. The machine has...
Lift trucks introduced
- May 26, 2016
- Metalworking
- Product Release
Big Lift LLC has added two lift trucks to its Joey line. The J1-190 can reach a working height of 22 ft. and accommodates a large battery for extended run times. The J2-72 is a low-level order picker that features a 2,000-lb. total vehicle capacity and can lift 1,500-lb. pallets up to 72 in. It...
Encoders simplify machine safety designs
- May 25, 2016
- Metalworking
- Product Release
Heidenhain offers Leine & Linde 850 shaft and 862 hollow-shaft encoders. This technology allows incremental encoders to be applied where safe operation of machinery is necessary without requiring a redundant encoder or secondary sensing device. The products are certified for SIL2/PLd, Category...
Mist collector designed for metalworking industry
- May 24, 2016
- Metalworking
- Product Release
Clarcor Industrial Air has introduced the SHM SmogHog® media mist collector. Designed for the metalworking industry, it uses a three-stage filtration process that progressively reduces the mist concentration, resulting in greater than 99 percent particle removal efficiency, says the company....
High-feed cutter processes difficult-to-machine steels
- May 23, 2016
- Cutting Tools
- Product Release
The Pramet Penta HF high-feed cutter from Dormer Pramet can be used across various applications on multiple materials, including heat-treated and difficult-to-machine steels, stainless steels, and heat-resistant superalloys. The cutter features internal coolant on body for deep-cavity milling and...
Cover caps work with angle brackets for profile systems
- May 20, 2016
- Metalworking
- Product Release
J.W. Winco Inc. offers metric GN 963 cover caps for GN 960 and 961 metric angle brackets for aluminum T-slot profile systems. After the angle brackets are assembled, the RoHS-compliant cover caps are snapped into place via four lugs. They give the angle bracket a finished appearance and protect...
Runout compensation nuts correct runout errors, misalignment
- May 19, 2016
- Metalworking
- Product Release
ReamTec EasyZero runout compensation nuts from Monaghan Tooling Group correct runout errors and misalignment for all round tools using ER collets. The replacement nuts feature six adjustment screws that allow for up to 0.011-in. runout to be dialed in rapidly. With concentric cutting, all cutting...
Welding information management system monitors welds in real time
- May 16, 2016
- Automation and Software
- Product Release
Miller Electric has introduced Insight Centerpoint™ welding information management system, which communicates in real time with an automated welding cell’s power supply and robotic welding arm via Ethernet. The software also can be applied to power supplies from other manufacturers with...
subscribe now
Keep up to date with the latest news, events, and technology for all things metal from our pair of monthly magazines written specifically for Canadian manufacturers!
Start Your Free Subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of Canadian Metalworking.
Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.
- Trending Articles
Aluminum MIG welding wire upgraded with a proprietary and patented surface treatment technology
Automating additive manufacturing
Sustainability Analyzer Tool helps users measure and reduce carbon footprint
Achieving success with mechanized plasma cutting
CTMA launches another round of Career-Ready program
- Industry Events
MME Winnipeg
- April 30, 2024
- Winnipeg, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Windsor Seminar
- April 30, 2024
- Windsor, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Kitchener Seminar
- May 2, 2024
- Kitchener, ON Canada
Automate 2024
- May 6 - 9, 2024
- Chicago, IL
ANCA Open House
- May 7 - 8, 2024
- Wixom, MI
17th annual Joint Open House
- May 8 - 9, 2024
- Oakville and Mississauga, ON Canada
MME Saskatoon
- May 28, 2024
- Saskatoon, SK Canada
CME's Health & Safety Symposium for Manufacturers
- May 29, 2024
- Mississauga, ON Canada
FABTECH Canada
- June 11 - 13, 2024
- Toronto, ON Canada
Zoller Open House & Technology Days 2024
- June 12 - 13, 2024
- Ann Arbor, MI