- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
More from CanadianMetalworking.com
Dormer Pramet debut expanded program
- Oct 6, 2014
- Cutting Tools
- News Release
This will not only provide a significantly enhanced tooling program but also an expanded sales and technical support service. Pramet’s presence at IMTS alongside Dormer was the first time its cemented carbide tooling program has been showcased in North America ahead of its launch in the...
Mind over Metal welding camp a big hit with kids
- Oct 6, 2014
- Welding
- News Release
The camps were designed by Ken McKen, CWA Manager for Western Canada and St. Joseph High School welding and fabrication instructor Dayton Block. There might have been some apprehension when the summer camp students first walked into the welding shop in St. Joseph High School in Edmonton, Alberta,...
CTMA aims for training role in Windsor area
- Oct 6, 2014
- Metalworking
- News Release
While the organization has always supported local business training initiatives, it is now taking its dedication a step further, by considering the creation of “The CTMA Training & Development Centre.” Youth skills Earlier this year, the CTMA was involved in two programs that...
Lincoln Electric celebrated for ISO energy initiatives
- Oct 6, 2014
- Welding
- News Release
UL DQS Inc., Chicago, IL, who worked with Lincoln Electric to help them achieve their certification, held an appreciation event for Lincoln at the Westin Prince Hotel in Toronto to recognize the company for its energy management initiative, and to present a certification plaque to president and CEO...
Canadian Company Helps Protect One World Trade Center Spire
- Oct 6, 2014
- Fabricating
- News Release
Situation The 408-ft.-high, 20-ft.-dia., 17-section spire of One World Trade Center required corrosion protection. The owner of the spire, the Port Authority of New York, planned to have the high-strength steel galvanized to protect it from corrosion. Drytec Trans-Canada, which has worked...
- From Canadian Industrial Machinery
It's a Snap
- By Sue Roberts
- Oct 6, 2014
- Made In Canada
- Article
The family-run business handles the body construction, interior finishing, interior and exterior furnishing, electrical outfitting, component installation, and exterior finishing for the units.
Machining tough, high-value parts in a small envelope
- Oct 6, 2014
- Metalworking
- Product Release
The YMC 430 YASDA Micro Center machines cemented carbide material with a Rockwell hardness of between 85 and 90 on the IMTS show floor.
Multi-spindle machines in action
- Oct 6, 2014
- Metalworking
- News Release
SW aims for growth in the North American market with its multi-spindle machines. Learn more about the company here.
Precision assembly technology
- Oct 6, 2014
- Metalworking
- News Release
Marcos Aranha, process engineer with Yaskawa America Inc., demonstrates four technologies in the Yaskawa Motoman booth at IMTS 2014 in Chicago.
Horn's S224 cutting insert with through tool coolant
- Oct 6, 2014
- Metalworking
- Product Release
The HP65-grade S224 indexable insert with through tool coolant, featuring the 3V geometry and a 3 mm (.118”) grooving width, is a new addition to the HORN range. Its wear-resistant AlTiN coating is specially designed for grooving and parting off stainless steels. The cutting insert with 3 mm...
Lincoln Electric introduces three new welding hand tools
- Oct 6, 2014
- Welding
- Product Release
Lincoln Electric introduces three new welding hand tools: a chipping hammer, welding pliers and the Welper—designed to aid welding operators, regardless of environment or process. Chipping Hammer A new chipping hammer makes it easy to clean and remove slag from any weld. The hammer head...
REGO-FIX expands N.A. sales and marketing team
- Oct 6, 2014
- Metalworking
- News Release
REGO-FIX is expanding. The company recently added two new members to its North American sales and marketing team. Steven Chase takes on the role of sales representative support manager, while Chris Herdman serves as a technical field support engineer. Together, these industry veterans will...
GM’S Big Recall
- By Jim Anderton
- Oct 6, 2014
- Metalworking
- Blog Post
In the auto industry, recalls, once rare, are now so frequent that they barely warrant mention in the daily news. Of the recent batch, the mother of them all is of course the General Motors ignition switch problem which at press time has resulted in a known 13 fatalities. The problem is simple: the...
Getting the fumes out
- By Nestor Gula
- Oct 6, 2014
- Welding
- Article
The smoke that rises from the arc when welding contains many elements that can be dangerous to the welder. The composition of these fumes can vary. This depends on the components of the base metal being welded, the fluxes being used and the presence of any coating on the metal. The smoke will also...
Success at the Canada LNG Export Conference
- Oct 6, 2014
- Metalworking
- News Release
In the past couple of months, LNG projects have seen their fair share of the limelight. Whether its news of municipal challenges to proposed plans, concerns over the environmental implicates by First Nations groups, uncertainty of partnerships within the oil and gas industry, or appealing to the...
subscribe now
Keep up to date with the latest news, events, and technology for all things metal from our pair of monthly magazines written specifically for Canadian manufacturers!
Start Your Free Subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of Canadian Metalworking.
Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.
- Industry Events
MME Saskatoon
- May 28, 2024
- Saskatoon, SK Canada
CME's Health & Safety Symposium for Manufacturers
- May 29, 2024
- Mississauga, ON Canada
DiPaolo Machine Tools Open House 2024
- June 4 - 5, 2024
- Mississauga, ON Canada
FABTECH Canada
- June 11 - 13, 2024
- Toronto, ON Canada
Zoller Open House & Technology Days 2024
- June 12 - 13, 2024
- Ann Arbor, MI
MMTS 2024
- June 18 - 20, 2024
- Montreal, QC Canada
IMTS 2024
- September 9 - 14, 2024
- Chicago, IL
FABTECH 2024 Orlando
- October 15 - 17, 2024
- Orlando, FL