- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Canadian Fabricating & Welding June 2019
Canadian Fabricating & Welding is Canada's only national, monthly magazine dedicated to complete coverage of the metal forming and fabricating industry. Our topnotch editorial covers a wide range of topics, including bending, forming, cutting, fabricating, tube and pipe, and welding.
The ironworker gets automated
- By Lindsay Luminoso
- Jun 28, 2019
- Fabricating
- Article
The ironworker offers flexibility and functionality all in one machine. Incorporating automation on only increases efficiency and productivity.
Small-format waterjets on the rise
- By Rob Colman
- Jun 19, 2019
- Fabricating
- Article
Because of its flexibility, waterjet cutting is a useful option in a shop, but a full-size table might be considered overkill for smaller shops that already have other cutting capabilities. Finding the right small-format machine, however, opens up new opportunities.
Additive tech takes on short-run press brake tooling
- By Rob Colman
- Jun 18, 2019
- Fabricating
- Article
Metal additive manufacturing, while an intriguing technology, is often well beyond the scope of most metal fabricating businesses. However, 3D-printed parts made of plastics or carbon fibre composites are a different story. For short-run press brake tooling and the production of peripheral assembly items, it has found a niche.
The rules of press brake tool selection, part II
- By Paul LeTang
- Jun 17, 2019
- Fabricating
- Article
Many consider press brake tooling a minor accessory in metal forming when in fact the opposite is true.
Laser welding creates efficiency sweet spot
- By Rob Colman
- Jun 13, 2019
- Fabricating
- Article
Although laser welding has been around for several years, it seems only now that it’s about to reach a critical market stage where its adoption is going to accelerate here in North America.
When to Choose a PAPR Welding Helmet
- By Lindsay Luminoso
- Jun 11, 2019
- Welding
- Article
When considering a PAPR welding helmet, safety should be a welder's top concern, especially when it comes to exposure to hazardous fumes and gases.
Bystronic Canada hosts Quebec Best Choice event
- Jun 6, 2019
- Fabricating
- Article
Mississauga, Ont.-based Bystronic Canada Ltd. recently presented one of its Best Choice events for customers, OEMs, and shop owners in Quebec. Held at EPP Metal, the seminar presented attendees with new technologies in laser cutting, bending, automation, software, and integration, with a strong...
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of Canadian Metalworking.
Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.
- Trending Articles
Aluminum MIG welding wire upgraded with a proprietary and patented surface treatment technology
Achieving success with mechanized plasma cutting
Hypertherm Associates partners with Rapyuta Robotics
Brushless copper tubing cutter adjusts to ODs up to 2-1/8 in.
Gema welcomes controller
- Industry Events
MME Winnipeg
- April 30, 2024
- Winnipeg, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Windsor Seminar
- April 30, 2024
- Windsor, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Kitchener Seminar
- May 2, 2024
- Kitchener, ON Canada
Automate 2024
- May 6 - 9, 2024
- Chicago, IL
ANCA Open House
- May 7 - 8, 2024
- Wixom, MI